The instrument basically consists of a Microprocessor Auto Melting Point Apparatus with Auto controlled heating rate arrangement, an air circulating arrangement and a digital temp. Indicating circuitry with necessary controls, Temperature at the melting point is latched on the digital display and the furnace is automatically cut-off. The instrument gives audio & visual indications, on reaching the temperature at which the sample melts. The melting temperature of the sample remain displayed on the pannel till the "RESET" switch is operated. Opto coupled light transmission based. Sample required to be tranparant at the time of melting.
Not Suitable for colored samples
(Transparent formation only at melting stage).
|Digital Display||4 Digits LED|
|Temperature Range||10°C to 350°C|
|Resolution||1°C (0.1°C Optional)|
|Temperature Sensor||Grade "A" PT-100, Platinum sensor|
|Sample Capacity||1 Samples, Capillary Dimension (1.4mm)|
|Temp. Controll||Microprocessor controlled closed loop PID|
|Ramp Rate||2°C to 10°C per miniute(Selectable Auto-Low-High)|
|Operation||Auto Detemination of Melting Point. All the selection of programming is fully protected from power failure including "HOLD" action of melting temperature. Once the start action is initiated, it will rich to find out the melting point of sample, even multiple time power failure|
|Power Supply||230V ± 10% AC, 50 Hz.|
|Dimension (L x B x H)||270 x 330 x 145 mm|
|Accessories||Melting Point Capillaries-100 pcs.|